Batch Counting; Serial Number Scanning - Safescan 2985-SX User Manual

BATCH COUNTING

The batch function is used to create stacks of an equal number of banknotes.
Press [BATCH] to open the Batch entry screen. By default the batch number is set to 100.
1. Type the desired batch number on the touch screen and press [OK] to confirm.
• Press [CLR] to clear the entry.
• Press [ESC] on the touch screen to exit the batch entry screen.
Note: Without any action the screen will return to the count screen after 10 seconds.
2. In the count screen, the batch number is shown.
Note: The batch function is not available in "Value-Mix" mode.
USING THE ADD FUNCTION
The ADD function is used to add the counting results of multiple counts to
the total.
1. Press [ADD] to activate the ADD function.
In the screen, the ADD indication appears.
2. Press [ADD] again to deactivate the function.

SERIAL NUMBER SCANNING

The serial number scan function records the unique serial numbers of the counted banknotes.
Serial number scanning is available for the following currencies: EUR, USD, GBP, CHF, HKD and CNY.
Activation of serial number scanning can be done in the user menu.
Viewing the serial number information:
• The serial number information is viewed on a receipt print after printing the count results.
Printing can be done on the optional Safescan TP-230 printer.
• The Safescan 2985-SX also offers the possibility to export the serial number information to the
Safescan Money Counting Software.
www.safescan.com
ENGLISH
11