Counting Banknotes - Safescan 2610 User Manual

COUNTING BANKNOTES

1.
COUNTING MODE. Press the MODE key to select the desired counting method. Default setting = SORT.
The following counting modes can be selected:
[SORT]: banknote counting including size detection. The counter will stop and sound an alarm if a banknote of a different
height than the first counted banknote has been detected.
[COUNT]: banknote counting without size detection, also referred to as "free sheet counting".
2.
AUTO START / MANUAL START. By pressing the AUTO button, you can select whether you want the banknote
counter to start counting automatically or manually. When the screen shows 'AUTO', the machine will start counting once
banknotes have been placed in the hopper. Default setting = AUTO.
When the device is set to "Manual", press the [START] button to start counting.
3.
START COUNTING BANKNOTES
Start your count by placing the banknotes in the
center of the hopper. Use the hopper guides to
keep the banknotes centered.
PLEASE NOTE
In SORT mode, the banknotes have to be sorted
per denomination before counting.
In COUNT mode, banknotes do not need to be
sorted. Please be advised that in this mode the
device simply counts the number of notes that are
being fed through the machine, no matter which
denominations are in the stack of notes.
A U TO
ALL
AU T O
A LL
A UTO
AL L
A U TO
A LL
www.safescan.com
S O RT
C O UNT
SO RT
AD D SO RT
ENGLISH
5