Add Function; Batch Counting - Safescan 2865-S User Manual

English
Mode
CAL
den
20
Cal Auto Add 1200
Count
Count Auto Add 1200

Add function

Use the add function to add the results of multiple counts to the total. Press [ADD] in the bottom-middle of the count
screen. or press the [ADD] button on the control panel. The bar above ADD will light up blue when activated.
batch
50
Mix Auto Add
Press to activate Add mode

Batch counting

The batch function is used to create stacks of an equal number of banknotes. Press [BATCH] to open the Batch entry
screen. By default the batch number is set to 100.
0 CLR
7
8
4 5
1 2
10
Main feature
Counting the value and number of
currencies which are not available
on the device.
pcs
0
Value
0
UV
Counting the number of
banknotes.
0
pcs
UV|MG
pcs
0
value
0
1000 EUR
1. Type the desired batch number on the touch screen and press [OK]
to confirm. Or repeately press the [BATCH] button to toggle between
ESC
the presetted batch numbers.
- Press [CLR] to clear the entry.
9
- Press [ESC] on the touch screen to exit the batch entry screen.
OK
6
3 4
More info, articles, tutorials and videos at: support.safescan.com
Explanation of mode
Select the value of the denominations
you are planning to count. The device
will automatically multiply this piece-value
to the number of counted sheets to
determine the value.
The device will operate as in COUNT
mode, and will not separate between
different denominations
Counting the number of banknotes without
checking banknote dimensions or value.
ON
Count results are added to the previous result.
OFF Previous count result is cleared when a new count
is started.