Safescan 2985-SX User Manual page 21

ADJUSTING THE FEEDING GAP
When counting errors such as double notes, chained or slant notes occur frequently, or when banknotes are
not being fed smoothly through the machine, it may be necessary to adjust the hopper adjusting knob. In the
factory, the position of the hopper wheel is set optimal. However, due to the nature of some banknotes, an
adjustment may be required to ensure optimal feeding.
• When the banknotes are not being counted smoothly: increase the note thickness distance by turning
the adjusting knob clockwise (+).
• When counting errors such as 'double notes' or 'chained notes/double notes' occur often, decrease
the note thickness distance by turning the adjusting knob anti-clockwise (-).
USE IN COMBINATION WITH SAFESCAN MONEY COUNTING SOFTWARE
The Safescan 2985-SX can be used in combination with the free Safescan Money Counting Software.
Visit: www.safescan.com/downloads. This enables you to export your counting results and serial number
information to the PC for further processing.
+
Included
Safescan MCS
software cable
www.safescan.com
ATTENTION! Make only
minor changes at once.
Make changes per dot or
half a dot.
+
PC (Windows operating
system) with MCS installed
ENGLISH
21