Safety And Operating Instructions - Siemens SINAMICS G130 Operating Instructions Manual

Safety information

1.2 Safety and operating instructions

1.2 Safety and operating instructions
This equipment is used in industrial high-voltage installations. During operation, this
equipment contains rotating and live, bare parts. For this reason, they could cause severe
injury or significant material damage if the required covers are removed, if they are used or
operated incorrectly, or have not been properly maintained.
When the machines are used in non-industrial areas, the installation location must be
protected against unauthorized access (protective fencing, appropriate signs).
Prerequisites
Those responsible for protecting the plant must ensure the following:
● The basic planning work for the plant and the transport, assembly, installation,
● The operating manual and machine documentation are always available.
● The technical specifications regarding the applicable installation, connection,
● The plant-specific assembly and safety guidelines are observed and personal protection
● Unqualified personnel are forbidden from using these machines and working near them.
This operating manual is intended for qualified personnel and only contain information and
notes relating to the intended purpose of the machines.
The operating manual and machine documentation are written in different languages as
specified in the delivery contracts.
Note
We recommend engaging the support and services of your local Siemens service center for
all planning, installation, commissioning and maintenance work.
8
DANGER
commissioning, maintenance, and repair work is carried out by qualified personnel and/or
checked by experts responsible.
environmental, and operating conditions are always observed.
equipment is used.
Operating Instructions, 05/2010, A5E00992420A
Sine-wave filter