Field Setting; Field Setting From Remote Controller - Daikin SkyAir RZQ-P Series Service Manual

Field Setting

3. Field Setting

3.1

Field Setting from Remote Controller

Individual function of indoor unit can be changed from the remote controller. At the time of
installation or after service inspection / repair, make the local setting in accordance with the
following description.
Wrong setting may cause error.
(When optional accessory is mounted on the indoor unit, setting for the indoor unit may be
required to change. Refer to information in the option handbook.)
3.1.1 Wired Remote Controller
 Applicable Models
Wired Remote Controller with
Weekly Schedule Timer
Navigation Remote Controller
 BRC1D71
If optional accessories are mounted on the indoor unit, the indoor unit setting may have to be
changed. Refer to the instruction manual for each optional accessory.
1. When in the normal mode, press the "
2. Select the desired MODE NO. with the "
3. During group control, when setting by each indoor unit (mode No. 20, 22 and 23 have been
4. Press the "
5. Press the "
6. Press the "
7. Press the "
 Example
When setting the filter sign time to "Filter Contamination Heavy" in all group unit setting, set the
Mode No. to "10", first code No. to "0" and second code No. to "02".
48
Model Series
UNIT NO.
SECOND
CODE NO.
FIRST
CODE NO.
1 7
FIELD SETTING MODE is entered.
selected), press the "
operation is unnecessary when setting by group.)
" upper button (Q) and select FIRST CODE NO.
" lower button (R) and select the SECOND CODE NO.
" button (S) once and the present settings are SET.
" button (T) to return to the NORMAL MODE.
TEST
FCQ FHQ
Unit NO.
SETTING
3
4
TEST
5
2
6
" button (N) for 4 seconds or more, and the
TEST
" button (O).
" button (P) and select the INDOOR UNIT NO. to be set. (This
SiUS28-902_B
FAQ
BRC1D71
BRC1E71
MODE NO.
FIELD
SETTING
MODE
Test Operation
FTQ