Removing The Non-Stick Soleplate; Active Ironing Board; Suction Function; Inflation Function - Miele B 3312 Operating Instructions Manual

Removing the non-stick soleplate

 Hold the iron by the handle.

The non-stick soleplate is still
very hot after ironing!
Avoid direct contact.
Only touch the tab of the non-stick
soleplate.
 Pull back the tab at the back of the
non-stick soleplate.
 Remove the iron from the non-stick
soleplate.
 Only store the non-stick soleplate in
the storage compartment (lower) after
the soleplate has cooled down.

Active ironing board

The steam ironing system uses a fan
that sucks away the steam or uses the
inflation function to inflate the ironing
board for optimum positioning while
ironing garments.
The ,  or ,  buttons on the
iron control the fan in the ironing board.

Suction function

The suction function ensures optimum
steam penetration of the fabric. At the
same time, the suction avoids the
formation of condensation on the
ironing board. The suction function also
holds the garment in place and ensures
it does not shift on the ironing board.

Inflation function

The inflation function forms a cushion of
air between the fabric and the ironing
board. This helps prevent seams being
pressed into the garment. The inflation
function allows you to iron without
flattening the fabric.
Tip: The inflation function also assists
with ironing ruffles and sequins.

Automatic switch on/off

The automatic switch on/off feature
ensures that the fan starts at exactly the
right moment. If the steam function is
being used, the fan starts automatically.
If steam is no longer needed, the fan
will stop after a short run-on time.
Ironing
37