Miele B 3312 Operating Instructions Manual page 23

 Guide the steam hose on the rubber
ring into the steam hose holder.
Ensure the steam hose fits tightly
and is not twisted.
 Always place the iron on the resting
surface before you start ironing and
when you take a break from ironing.
This prevents damaging or
discolouration of the ironing board
cover.

Do not place the iron in an
upright position!
It can easily tip over or fall to the
floor.
Always place the iron onto the
resting surface with its soleplate
down.

If the iron remains on the resting
surface for any length of time, the
surface will become hot.
Avoid direct contact with the resting
surface.
Only touch the handle.
Before turning off the iron, and
before placing the iron down, make
sure you switch off the continuous
steam function.
If the continuous steam function is
not switched off, the following
message will appear in the display

Release stm. button
Unlock the  button by pushing the
slider on the iron forward (see
"Ironing").
Condensation can form on the resting
surface. However, this does not affect
the functioning of the steam ironing
system.
Connection
.
23