Cooldown Function; Auto-Off Function - Miele B 3312 Operating Instructions Manual

CoolDown function

 Iron switched off
The heating of the iron switches off
automatically if the iron is not moved for
longer than 3 minutes. The message 
appears in the display to indicate that
the heating has switched off. After a
certain time, steam is no longer
available. The message 
button appears when the steam button
is locked. In this case, unlock the
 steam button by pushing the slider
on the iron forwards (see "Ironing").

The soleplate is still hot
immediately after the heating has
been switched off!
Avoid direct contact.
As soon as the iron is moved, or the
steam button has been released, the
iron will start heating up again
automatically. The time taken for the
steam to be available again depends on
the length of time the heating was
switched off.
When the steam ironing system is ready
and steam is available, the message

Ready for use will be shown in the
display on the tower.

system unattended with the iron or
steamer connected!
Always switch off at the wall socket
and withdraw the plug before leaving
the steam ironing system.

Auto-Off function

If the iron or the steamer is not used for
approx. 25 minutes, the entire steam
ironing system switches off
automatically.
Release stm.
The steam ironing system is switched
on again by pressing the  button on
the control panel.
Switching on
Do not leave the steam ironing
33