Rinse water container and fill to
the mark
Remove the water container from the
tower.
As long as the water container is not
inserted into the tower, the display will
show the following message
container
.
Open the screw cap.
Rinse the water container thoroughly.
Make sure no residues of the
descaling tablets remain in the water
container.
Fill the water container with fresh
water at least up to the level marking.
Close the screw cap.
Put the water container back into the
tower.
Empty drawer
Remove the residual water drawer
from the tower.
The message
in the display.
Empty the residual water drawer.
Fit water
Slide the residual water drawer back
into the tower until it clicks into place.
Cleaning and care
Fit drawer
will appear
55