Ironing With The Non-Stick Sole Plate; Removing The Non-Stick Sole Plate - Miele B 1312 Operating Instructions Manual

Ironing with the non-stick sole plate

In the lower compartment there is a
non-stick sole plate which simply clips
onto the iron.
,
Danger of burning. The sole
plate becomes very hot when in use.
Avoid direct contact with it.
^ Place the iron tip first in the non-stick
sole plate.
^ Pull back the tab on the bottom of the
non-stick sole plate, hold onto it and
push the iron onto the non-stick sole
plate.
^ Then release the tab. This will clip
onto the iron.
^ Wait for about 1 minute until the
non-stick sole plate has heated up,
before starting to iron.
With the non-stick sole plate, you can
generally iron appliqués, printed or
flocked textiles etc, without turning the
garment inside out.
It also reduces or eliminates the
formation of shiny patches on dark
textiles.
Always try it out on an unobtrusive part
of the fabric first.

Removing the non-stick sole plate

,
Danger of burning. The sole
plate becomes very hot when in use.
Avoid direct contact with it.
^ Pull back the tab on the bottom of the
non-stick sole plate and take the iron
out.
,
The non-stick sole plate remains
very hot after use. Avoid direct
contact. Hold it by the tab.
Do not store the non-stick sole plate in
its storage compartment until it has
cooled down.
Ironing
31