Keysight Technologies 86120D User Manual page 74

2 Using the 86122C
74
Press this button to return the instrument to its factory
default conditions.
The exceptions are:
• GPIB address
• references
• Printout type
• OSNR user wavelength
• Don't Show this dialog on Startup check box
Press this button to exit the current measurement
application and initiate an auto-measurement sequence.
Press this button to open the Setup toolbar. You can then
modify a variety of measurement and display setup
functions.
Press this button to open the Data View toolbar. You can
then configure the tabular display as desired
Press this button to open the Applications toolbar. You can
then select your desired measurement application.
Press this button to place the instrument in single sweep
mode and initiate a single sweep of the instrument.
Press this button to place the instrument in continuous
sweep mode and initiate sweeping.
Keysight 86120D and 86122C Multi-Wavelength Meters User's Guide