Keysight Technologies 86120D User Manual page 40

1 Getting Started
CAUTION
WARNING
40
Optical channel fiber-optic connectors are easily damaged when
connected to dirty or damaged cables and accessories. When you use
improper cleaning and handling techniques, you risk expensive
instrument repairs, damaged cables, and compromised measurements.
Before you connect any fiber-optic cable to the Keysight Variable Optical
Attenuator modules and Keysight Variable Optical Attenuator modules
with Power Control, refer to
Figure 20
Always remove both ends of fiber-optic cables from any instrument,
system, or device before visually inspecting the fiber ends. Disable all
optical sources before disconnecting fiber-optic cables. Failure to do so
may result in permanent injury to your eyes.
Keysight 86120D and 86122C Multi-Wavelength Meters User's Guide
on page 84.
Cleaning Instructions