Table of Contents
Advertisement
1
Getting Started
CAUTION
CAUTION
60
•
Company name and return address.
•
Name and phone number of technical contact person.
•
Model number of returned instrument.
•
Full serial number of returned instrument.
•
List of any accessories returned with instrument.
2
Cover all front or rear-panel connectors that were originally covered
when you first received the instrument.
Cover electrical connectors to protect sensitive components from
electrostatic damage. Cover optical connectors to protect them from
damage due to physical contact or dust.
Instrument damage can result from using packaging materials other than
the original materials. Never use styrene pellets as packaging material.
They do not adequately cushion the instrument or prevent it from shifting
in the carton. They may also cause instrument damage by generating
static electricity.
3
Pack the instrument in the original shipping containers. Original
materials are available through any Keysight office. Or, use the
following guidelines:
•
Wrap the instrument in antistatic plastic to reduce the possibility of
damage caused by electrostatic discharge.
•
For instruments weighing less than 54 kg (120 lb), use a
double-walled, corrugated cardboard carton of 159 kg (350 lb) test
strength.
•
The carton must be large enough to allow approximately 7 cm (3
inches) on all
•
sides of the instrument for packing material, and strong enough to
accommodate
•
the weight of the instrument.
•
• Surround the equipment with approximately 7 cm (3 inches) of
packing material,
•
to protect the instrument and prevent it from moving in the carton. If
packing
Keysight 86120D and 86122C Multi-Wavelength Meters User's Guide
Advertisement
Table of Contents
