Specifications - sauter TG 1250-0.1FN Instruction Manual

2 Specifications

Display: 4 digits, 10mm LCD, with backlight
Range: 0 up to 1250 µm/ 0 up to 50 mil (Standard) (another range may be specified)
Resolution: 0.1µm (0 up to 99.9µm)
1µm (above 100µm)
Accuracy:
- Standard: 3% of the measured value or min. ± 2.5 µm
This is valid within a tolerance range of ± 100 μm around the typically measured
range, if a two-point calibration was performed within this tolerance range.
- Off-Set Accur Mode: 1% of the measured value or min. ± 1.0 µm
this is valid within ± 50 μm around the Off-Set Accur point.
PC connection: by RS-232C interface
Power supply: 2 x 1.5V AAA (UM-4) batteries
Operating conditions:
Dimensions: 126 x 65 x 35 mm (5.0 x 2.6 x 1.6 Inch)
Weight: ca.81g (without batteries)
Scope of delivery: - Carrying case
- TF 1250-0.1FN : Inbuilt sensor F as well as inbuilt sensor N
- TG 1250-0.1FN: External sensor FN extern
- 1 Set calibration foils, is delivered in standard at each model
- Base plate (iron)
- Base plate (aluminium)
Optional accessories: - Software and cable for RS-232C: ATC-01
4
- Operation manual
(base material is recognized automatically)
(base material is recognized automatically)
- RS-232 to USB adapter: AFH 12
- Calibration foils (replacement order): ATB-US07
- External sensor FN (for TG 1250-0.1FN): ATG 01
Temperatures
Humidity
0 up to 50°C
< 95 %
TF_TG-BA-e-1813