Advertisement
Never load more than the max. capacity to a measuring cell. Overloaded measuring
cells no longer have the required accuracy. Overloaded or deformed measuring cells
are no longer allowed to use and must be changed quickly.
Never step under suspended loads.
Always fasten overload- or break security to your construction.
Pay attention to the allowed static and dynamic loads of the used equipment.
Let the measuring cells calibrate at regular intervals.
Only load the measuring cell in its specified load direction. Avoid lateral forces.
Control the measuring cells to deformations and cracks.
Measuring cells with 4-Conductor cable will change their characteristic value when
shortened or extended the cable length.
5 Warranty
The warranty expires at:
• Disregard of the specifications of the operating manual
• Modification or opening the measuring cell
• Overload
• Mechanical damages
• Damage caused by liquids or media
• Natural loss
• Not correct installation
6 Detailed specifications
Output sensitivity ( = FS )
Maximum capacity ( Emax )
Max.number of load cell
intervals
Ratio of min. LC verification
interval
Combined Error
Minimum dead load
Safe overload
Ultimate overload
Zero balance
Excitation, recommended
voltage
Excitation maximum
Input resistance
Output resistance
Insulation resistance
Compensated temperature
Operating temperature
Storage temperature
Recommended torque on
fixation bolts
4
CP P1-BA-e-2320
mV/V
kg
3, 5, 6, 8, 10, 15, 20, 30, 35, 40, 50
nLC
Y = Emax
/ vmin
%FS
Of Emax
of Emax
of Emax
of FS
V
V
Ω
Ω
MΩ
°C
°C
°C
< 30kg: 6
Nm
2.0 ± 0.2
3000
10000
≤± 0.0230
0%
150 %
300 %
< ± 2.0 %
5 ~ 12
18
409 ± 6
350 ± 3
≥5000 ( at 50VDC )
-10...+40
-35...+65
-40...+70
> 30kg: 10
>30kg: 10
Advertisement
