Section 10 - Electrical Characteristics - Motorola MC68360 User Manual

Errata and added information to quad integrated communication controller
Hide thumbs Also See for MC68360:
Table of Contents

Advertisement

In MC68040 companion mode, the QUICC
MC68040-type bus cycles but cannot generate them. If the
QUICC becomes busmaster, e. g. for SDMA transfers, it will
drive normal MC68030-type bus cycles with TT1 becoming DS
again. This should normally be no problem since the MC68040
does not interpret these input signals, but external circuitry han-
dling these signals must be aware of this fact.
6. Error in Figure 9-8.
On page 9-33, Figure 9-8, the buffer between RESETH, RSTI, the pushbutton and
CONFIG2 should not have an inverting output; it should be a non-inverting buffer.
7. Error in Reset Strategy.
On Page 9-34, section 9.4.1.3, the first sentence "If a QUICC is configured to provide the
global chip select, it will also provide an internal power-on reset generation." is not correct.
QUICC will provide internal power-on reset generation regardless of chip select
configuration.
8. Error in Caching Sample Code.
On Page 9-53, section 9.5.4, correct the following in the code sample:
a) 'MOVE.L #$003FC020,D0' should be changed to 'MOVE.L #$003FC040,D0'.
b) 'MOVE.L #$403FC010,D0' should be changed to 'MOVE.L #$403FC020,D0'.
9. Error in Figure 9-33. 1-Mbyte DRAM Bank—32 Bits Wide.
On Page 9-87, Figure 9-33, correct the following:
a) On the first MC74F157, B0-B3 should be connected to A11-A14, not A12-A15.
b) On the second MC74F157, B0-B3 should be connected to A15-A18, not A16-A19.
c) On the third MC74F157, A1 and B1 should be unused (unconnected).
d) On the third MC74F157, B0 should be connected to A19, not A20.
e) On the third MC74F157, Y1-Y3 should be unused (unconnected).
Section 10 – Electrical Characteristics
1. Missing Note on Maximum Ratings
On Page 10-1, the following note should be added to the maximum ratings figure:
3. The supply voltage V
out of reset properly.
MOTOROLA
Freescale Semiconductor, Inc.
must start and restart from 0.0 V; otherwise, the 360 will not come
cc
MC68360 USER'S MANUAL ERRATA
For More Information On This Product,
Go to: www.freescale.com
understands
17

Advertisement

Table of Contents
loading

Table of Contents