Connecting The Power Cord; Loading Printing Paper - Sharp UX-B20 Service Manual

4. Attaching the paper tray
1) Attach the paper tray.
2) Attach the paper tray extension.

5. Loading printing paper

You can load letter or legal size paper in the paper tray. Recom-
mended paper weight is 20-lb. Copy Bond. The maximum number of
sheets is as follows:
Letter size: Approx. 100 sheets (20-lb. copier paper at room tempera-
ture; maximum stack height should not be higher than the line on the
tray)
Legal size: 10 sheets (20-lb. copier paper at room temperature)
1) Fan the paper, and then tap the edge against a flat surface to even
the stack. Make sure the stack edges are even.
2) Insert the stack of paper into the tray, PRINT SIDE UP.
• If paper remains in the tray, take it out and combine it into a sin-
gle stack with the new paper.
• Be sure to load the paper so that printing takes place on the
print side of the paper. Printing on the reverse side may result
in poor print quality.
• GENTLY LOAD PAPER INTO THE PAPER TRAY.
• DO NOT FORCE IT DOWN INTO THE FEED SLOT.
Note: Do not use paper that has already been printed on, or
paper that is curled.

6. Connecting the power cord

Plug the power cord into a 120 V, 60 Hz, grounded AC (3-prong) out-
let.
Click!
Caution!
• Do not plug the power cord into any other kind of outlet. This will
damage the machine and is not covered under the warranty.
• Make sure you have removed all of the packing tape before
plugging in the power cord. Plugging in the power cord without
doing so may damage the machine.
• The machine does not have a power on/off switch, so the power is
turned on and off by simply plugging in or unplugging the power
cord.
• "CHECK CARTRIDGE" normally appears in the display the first
time you plug in the machine. This message appears until you
install the print cartridge.
Note: If you area experiences a high incidence of lightning or power
surges, we recommend that you install surge protectors for the power
and telephone lines. Surge protectors can be purchased at most tele-
phone specialty stores.
1 – 5
UX-B20U/UX-B20C/B25C
The stack
should not be
higher than this line.