Touch Panel; Selecting A Function - Sharp TINSE2026QSZZ Operation Manual

BEFORE USING THE MACHINE

TOUCH PANEL

Using the touch panel
[Example 1]
JOB QUEUE SETS / PROG
003 / 000
COPY
SHARP001 003 / 000
Beep
tone
[Example 2]
1/13
COMPLETE
The confirmation beeps can be disabled in the
administrator settings. (See "6. SYSTEM SETTINGS
(ADMINISTRATOR)".)
The touch panel screens shown in this manual are
printed images and may differ from the actual screens.
12
Items on the touch panel
are selected by touching
the key associated with
the item. A beep will
sound to confirm that the
item was selected and
the key will be
highlighted.
* A double-beep is
sounded when an
invalid key is touched.
Keys which are grayed
out cannot be selected.

Selecting a function

[Example 1]
CANCEL OK
LEFT RIGHT
BINDING BINDING
[Example 2]
If you need to cancel a selection, simply press the key
once again so that it is not highlighted.
DUAL PAGE
COPY
MULTI SHOT
DUAL PAGE
COPY
MULTI SHOT
[Example 3]
Items which are
highlighted at the time a
screen appears are
already selected and will
take effect when the [OK]
key is touched.
1/
The key is no longer
highlighted and the
1/
selection is canceled.
When the machine is
used in copy mode or fax
mode and a special
mode is selected, a icon
will appear on the touch
panel.