Sharp TINSE2026QSZZ Operation Manual page 12

BEFORE USING THE MACHINE
Interior
22
Paper trays
15
Each tray holds 500 sheets of copy paper. (p.16)
Upper right side cover
16
Open to remove misfeeds when an optional job
separator tray kit or a optional finisher is installed.
(p.133)
Side cover
17
Open to remove misfeeds. (p.129)
Side cover handle
18
Pull to open the side cover. (p.129)
Bypass tray paper guides
19
Adjust to the width of the paper. (p.19)
Bypass tray
20
Regular paper and special paper (such as
transparency film) can be fed from the bypass tray.
(p.19)
Bypass tray extension
21
Pull out the bypass tray extension before placing
paper in the bypass tray. (p.19)
Toner cartridge lock release lever
22
Use to unlock the toner cartridge. (p.134)
Toner cartridge
23
Contains toner. (p.134)
10
23
24
25
Roller rotating knob
24
Turn to remove misfed paper. (p.129)
Photoconductive drum
25
Copy images are formed on the photoconductive
drum.
Do not touch the photoconductive drum
Caution
(green portion). Doing so may damage the
drum and cause smudges on copies.
Fusing unit release levers
26
To remove a paper misfeed in the fusing unit, push
up on these levers and remove the paper. (p.130)
The fusing unit is hot. Do not touch
Warning
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Fusing unit paper guide
27
Open to remove misfed paper. (p.130)
The model name is on the front cover of the
Note
machine.
27
26