Frame Preparation - Cervélo S5 Assembly Manual

FRAME PREPARATION

1. Apply carbon paste to both frame and
seatpost.
2. Insert Seatpost Clamp (SPC-0E0S5) fully into
frame so it is fully flush with the top tube.
3. Adjust height and torque to 8Nm maximum.
Hold the frame using a
secured seatpost only.
S5_Disc_manual_v5.5.indd 10
Clamping the top tube can damage
the frame and void your warranty.
Lightly grease Rear Derailleur Hanger Fixing
Nut and install Rear Derailleur Hanger (DRH-
RAT for Cervélo Rapid Axle) finger tight.
Final tightening will be done after rear wheel
installation.
Do not final tighten rear derailleur hanger
assembly without rear wheel installed. Doing
so will result in a misaligned derailleur and
poor shifting.
Lightly grease supplied M4 fixing screw,
and install the Front Fork Axle Insert (QRI-
RAT for Cervélo Rapid Axle) to the fork.
Tighten to 3Nm.
10
2018-08-27 10:55 AM