Cervélo S5 Assembly Manual page 13

07
Grease the bearing cups in the frame, then
install bearings. Feed brake hose and derailleur
controls through Preload Cone. Install fork and
tighten Preload Cone until fork has no play but
still rotates smoothly. Refer to page 20.
08
Feed hoses and derailleur controls through Fork
Topper. Use the supplied M5 x 16mm screws to
secure fork. Refer to page 21.
S5_Disc_manual_v5.5.indd 12
09
Feed cables and hoses through desired
amount of 5mm Stem Spacers.
10
Install the stem so that the brake hoses
pass through the appropriate blades. E-Wire
travels up through the right hand blade. With
mechanical controls the rear housing is on the
right and the front on the left.
11
Ensure you have the correct length bolts, apply
Loctite 242 and secure the stem and stem
spacers to the Fork Topper. Refer to pages 22-24.
12
Install handlebar and connect the controls.
Refer to page 25.
12
2018-08-27 10:55 AM