Table of Contents
Advertisement
Voltage conversion (Conv Voltage)
If you set Conv Voltage to on, the current converted using a specified voltage is displayed based on the
voltage supplied to the EUT and the measured current. Judgment is also performed on the converted cur-
rent. If set to on,
1
On the Home menu screen, press Scale repeatedly until Scale is selected.
Each time you press the key, the setting changes between Meas and Scale.
2
Press Conv Voltage to switch between on and off.
Conv Voltage switches between on and off each time you press the key.
3
If you select on, use the numeric keypad or the rotary knob to enter the voltage.
Setting range: 80.0 V to 300.0 V
This completes the setting.
Checking the EUT operation (Line OUT)
Check the EUT operation before testing. For details, see "Checking the EUT operation" (p.242).
TOS93 Series
appears during testing.
Touch Current Test | Setting Test Conditions
119
User's Manual
Advertisement
Table of Contents
