High Voltage Test Probe - Kikusui HP11-TOS Operation Manual

OPERATION MANUAL

HIGH VOLTAGE TEST PROBE

HP11-TOS
The HP11-T OS High V oltage T est Probe is a test v oltage output probe that connects to a
KIKUSUI T OS7200 Insulation Resistance T ester . Its con v enient shape allo ws f aster
connection to the de vice under test (DUT).
Y ou ha v e to pre v ent potential electric shocks while performing tasks close to a high-
v oltage area (see Description *1 on page 8) such as the DUT when performing insulation
resistance tests with the test probe.
NOTE
• This product is designed to be used with a KIKUSUI T OS7200 Insulation
Resistance T ester . Carefully read the w arnings and precautions gi v en in the
T OS7200 Insulation Resistance Tester Operation Manual before
attempting to use it.
• To use the HP11-TOS High Voltage Test Probe, the TOS7200 incorpo
rating ROM of version "1.07" is required.
To Supervisor in Charge of Operations
• Use of the test probe involves unavoidable electrical shock hazards.
Take appropriate measures to ensure maximum safety in the test envi-
ronment at the DUT, at the test bench, and in nearby areas.
• If the operator does not read the language used for this manual, trans-
late the manual into an appropriate language.
• Ensure that the operator understands the information in this manual
before starting operations.
• Keep this manual near the product to allow for easy reference by the
operator when necessary.
Ensuring Safety (How to Avoid Electric Shock)
To prevent electric shock that may result in serious injury or death, never
touch the following items:
• Never touch the contact pin of the test probe.
• Never touch the DUT during testing.
Observe the following instructions to minimize the potential for electric
shock that may result in serious injury or death.
• Never perform testing when leaning on your elbows at the test bench or
in other areas.
• Generate test voltages only when performing actual tests.
-