Precautions For Moving; Checking The Line Voltage And Fuse - Kikusui DME1500 Operation Manual

Digital multimeter

1.3

Precautions for moving

When moving or transporting the product to an installation site,

observe the following precautions.

■ Turn the POWER switch off.

Moving the product with the power on may result in electrical

shock or damage.

■ Remove all wirings connected.

Moving the product with cables connected may break the cables

or cause the product to fall, resulting in injury.

■ For transportation, use the special packing material for

the product.

Transport the product in its original package to prevent vibration

and falls, which may damage the product. If you require packing

material, contact Kikusui distributor/agent.

1.4

This instrument is used by selecting one of the three line voltage

ranges speciﬁed in table 1-1. Check the default settings to deter-

mine whether the voltage is suitable for your instrument. Use a

input power fuse appropriate for your line voltage range.

• To prevent electric shock, be sure to unplug the AC

WARNING

• Make sure that the fuse used conforms to the

CAUTION

When checking or changing the line voltage range, or when

checking or replacing the power fuse, observe the following

instructions:

DME1500

power cord before checking or replacing the fuse.

instrument speciﬁcations, including shape, rating,

and characteristics. Using a fuse with different rat-

ing or short-circuiting, the fuse holder will damage

the instrument.

SETUP E-13

Table of Contents