Checking The Line Voltage And Fuse - Kikusui KJM6335 Operation Manual

1.4

Checking the Line Voltage and Fuse

This meter is used by selecting one of the four line voltage ranges
specified in Table1-1. Check the default settings to determine
whether the voltage is suitable for your meter. Use a input power
fuse appropriate for your line voltage range.
• To prevent electric shock, be sure to unplug the AC
WARNING
• Make sure that the fuse used conforms to the meter
CAUTION
When checking or changing the line voltage range, or when
checking or replacing the power fuse, observe the following
instructions:
1. Turn off the POWER switch and disconnect the power cord.
2. Remove fuse holder as shown in Fig. 1-2 "Removing Fuse
Holder".
3. Referring to the LINE VOLTAGE table on the rear panel,
check the rating and blowing characteristic of the fuse
mounted. If a wrong fuse is used, replace it.
Table 1-1 LINE VOLTAGE
4. Check the line voltage to use from the LINE VOLTAGE
table, adjust the voltage selector to the ▼ mark and push in
the cover.
1-4 Setup
power cord before checking or replacing the fuse.
specifications, including shape, rating, and
characteristics. Using a fuse with different rating or
short-circuiting, the fuse holder will damage the
meter.
KJM6335