Notes For The User; Information About The Product; Warranty; Contact Data - HellermannTyton Autotool System 3080 Operating Instructions Manual

1

Notes for the user

These Operating Instructions are very important for correct
use of the ATS3080.
They contain important information and safety instructions
that will enable you to utilise the product correctly and
economically for its intended use.
The instructions help avoid hazards, reduce repair costs and
downtimes, and enhance the dependability and durability of
the ATS3080.
Non-compliance of any nature whatsoever can lead to
accidents with fatal consequences, injury or damage to
property.
1 1

Information about the product

Product designation: ATS3080
Article number: 102-00000
Further information on the product can be found on the
nameplate.
1 2

Warranty

The warranty is in accordance with statutory requirements.
Warranty entitlement applies only in the country in which
the device was originally purchased.
Batteries, fuses and light sources are not covered by the
warranty.
1 3

Contact data

The manufacturer of the product described in these
Operating Instructions is:
HellermannTyton GmbH
Grosser Moorweg 45
D-25436 Tornesch, Germany
Tel. +49 4122 701-0
www.HellermannTyton.de
info@HellermannTyton.de
1 4

Information about these Operating Instructions

Last update: 20.12.2018
1 5 Copyright and intellectual property rights
The manufacturer retains the copyright to these Operating
Instructions. Under no circumstances may these instructions
be reproduced or electronically processed, replicated or
disseminated, in whole or in part, without the prior written
consent of HellermannTyton GmbH (hereinafter referred to
as HellermannTyton). Any breach or infringement of these
stipulations will result in liability for damages.
Operating Instructions • ATS3080 • 02-2017 • v01 • 102-01002
1 6 Keeping and dissemination of the Operating
Instructions
These Operating Instructions must be kept in the immediate
vicinity of the workplace and must be available at all times to
all operating personnel. The operating company shall inform
the operating personnel of the location of these Operating
Instructions.
The operating company shall obtain replacement from the
manufacturer if these instructions are, become or are
rendered no longer easily legible.
If the ATS3080 is acquired by or sold on to a third party the
following documents must be handed over to the new
owner:
• Operating Instructions
• Documents relating to repair work
• Logs of maintenance work undertaken
f Protect these Operating Instructions from moisture,
direct sunlight and extreme heat.
1 7

Target group of these Operating Instructions

These Operating Instructions must be read and complied
with by every person charged with any of the following
tasks:
• Installation
• Operation
• Maintenance
• Repair
• Fault rectification
1 8

General information

All accompanying drawings are exempt from the
modification service.
1 9 Conventions adopted in these Operating
Instructions
1 9 1 Classification of the precautionary notices
Precautionary notices in these Operating Instructions draw
attention to hazards associated with use of the ATS3080 and
indicate how they can be avoided.
The precautionary notices are subdivided into three groups
according to the severity of the potential hazard:
DANGER
Text accompanied by the signal word "DANGER" indicate
hazardous situations which, in the event of non-compliance
with the appropriate precautions, will cause death or severe
injury.
WARNING
Text accompanied by the signal word "WARNING" indicate
hazardous situations which, in the event of non-compliance
with the appropriate precautions, can cause death or serious
injury.
Notes for the user
5