Operating Page - Standard (Level 1) - ABB DATUM L160 User Manual

...2 OPERATOR MODE
2.2 Operating Page – Standard (Level 1)
2145. 3
UN-ACK
G1. 0 00
CodE
----
LEVEL1
•1 Only displayed if there is an active latch alarm.
8
Process Variable
2145. 3
units.
12. 6
•1
Global Alarm Acknowledge (latch alarms only)
UN-ACK
ACK.
Specific Gravity
This is the value of specific gravity currently being
applied to the process variable (display only).
Security Code
Enter the password to access the Set Up Level
(Level 2) or the Configuration Level (Levels 3 and 4).
The default code is 0.
[0 to 9999]
Level 1
Note. To select this frame from anywhere in this
level, press and hold the
Normally displayed in engineering
To view the input value (in electrical
units) press the
– alarm unacknowledged
– alarm acknowledged
key for a few seconds.
key.