Alarms - ABB DATUM L160 User Manual

...4 CONFIGURATION MODE
4.3.2 Alarms – Figs. 4.3, 4.4, 4.5 and 4.6
All alarms output relays are de-energised in the alarm state (fail safe).
E 0000
F 0000
G 0000
H 0000
P 0000
20
'EFGH' Settings
The first character (E, F, G or H) identifies the
parameter to be changed. The current setting is
indicated by a flashing letter. Parameter options are
shown in Fig. 4.5.
= Alarm 1 type
E
F = Alarm 2 type
= Alarm 3 type
G
= Alarm hysteresis
H
Note. For fail safe operation, active alarms
denergize the relay and inactive alarms energize the
relay. For custom settings contact the local
distributor.
Continued on page 22.