Error Messages - ABB DATUM L160 User Manual

...1 DISPLAYS AND FUNCTION KEYS

1.4 Error Messages

Display
tESt
CAL. E rr
CFG. E rr
A. d . Err
IP. F AIL
OPt. E rr
6
Error/Action
Start-up screen
Displayed at system start-up.
Calibration error
Turn mains power off and on
again (if the error persists contact
the ServiceOrganization).
Configuration error
The configuration and/or setup
data for the instrument is
corrupted. Turn mains power off
and on again (if error persists,
check configuration/setup settings).
A to D Converter fault
The analog to digital converter is
not communicating correctly.
Sensor input out of range
Option board error
Communications to the option
board have failed.
To Clear Display
Clears automatically
(after 3 secs.) to display
software version/issue
– see Fig. 1.1.
Press the key.
Press the key.
Turn the power off and
on again. If the problem
persists, contact the
Service Organization.
Restore valid sensor
input.
Check sensor output.
Contact the Service
Organization.