Set Up Level (Level 2) - ABB DATUM L160 User Manual

...3 SET UP MODE

3.2 Set Up Level (Level 2)

LEVEL2
A1. h P
100. 1
A1. H YSt
100. 0
A2. L P
200. 2
A2. . H YSt
20. 0
A3. h P
•1 Not displayed if the alarm is disabled ('None' selected) – see Section 4.3.2.
•2 Only displayed if custom alarm hysteresis is selected – see Section 4.3.2
(not displayed for rate alarms).
Level 2
Note. To select this frame from anywhere in this
level, press the
•1
Alarm 1 Trip Point
Alarm type:
•2
Alarm 1 Hysteresis
Not applicable to
Alarm 2 Trip Point
•1
Alarm type
Alarm 2 Hysteresis
•2
Not applicable to
Continued on next page...
key for a few seconds.
= High level alarm
A1. h P
= Low level alarm
A1. L P
A1. H L = Latched high level alarm
= Latched low level alarm
A1. L L
= Fast rate level alarm
A1. F r
A1. S r = Slow rate level alarm
[In engineering units or % of engineering
span per hour]
and
A1. F r
[Process alarms – engineering units]
[In engineering units or % of engineering
span per hour].
and
A2. F r
[ in % engineering range]
alarm type.
A1. S r
alarm type.
A2. S r
8
13