Pepperl+Fuchs VisuNet EX2 GMP RM/PC 3700 Series Hardware Manual page 55

VisuNet EX2 GMP RM/PC 3700 Series
Installation and Commissioning
1. Screw the cable glands with a fork wrench
2. To plug up cable glands that are not in use lightly tighten the cable gland.
3. Plug the caps in.
Sealing the cable gland with a cap
1 Cap
4. Firmly tighten the cable gland.
Mounting grounding cable to cable gland plate
Danger!
Danger of explosion
Substantial material damage, personal injury or even up to death
Use a cable with a core-cross section of min. 4 mm
1. Pull the grounding cable inside the pedestal to the cable gland plate.
2. Tighten the grounding cable. (see chapter 3.4.1)
2
for grounding.
55