Mounting The Pedestal - Pepperl+Fuchs VisuNet EX2 GMP RM/PC 3700 Series Hardware Manual

VisuNet EX2 GMP RM/PC 3700 Series
Installation and Commissioning
Grounding VisuNet GMP at pedestal
Note!
Depending on the grounding cable you need the adequate cable lug (not included in delivery).
1. Insert the grounding cable into the cable lug (7).
2. Unscrew the M5 screw nut (5) on ground connection.
3. Insert the cable lug between screw nut (2) and washer (3).
4. Tighten the screw nut (torque 6 Nm).
Figure 3.3
1 contact disk
2 screw nut
3 washer
4 lock washer
5 screw nut
6 hexagon socket set screw
7 cable lug
3.5

Mounting the pedestal

Mounting pedestal on the ground
Note!
For fastening the pedestal, use 4 screws (M8) which suit the soil conditions.
48
2 3 4
1 5
6
7
Grounding at pedestal