VisuNet EX2 GMP RM/PC 3700 Series
Installation and Commissioning
Running cables through pedestal
For easier installation of the connection cables through the pedestal, wires are already installed
through the pedestal and the cable glands (1).
1. Depending on cable diameter, choose the adequate cable gland (e.g. 1 cable gland for sup-
ply cable, 1 cable gland for network cable).
2. Attacht the connection cable to the current string and pull the cable carefully up.
3. Remove the strings from the connection cables.
1
Wire pull for connection cables
2
Connection cable
1
2
1
Wire pull for keyboard cable
2
Keyboard cable
Attach the keyboard at the pedestal
Attach the keyboard with 3 x M6 grub screws with a 3 mm allen screw at the pedestal. Torque: 4
Nm
1
2
51