VisuNet EX2 GMP RM/PC 3700 Series
Product Specifications
2.9.3
Hole pattern of the turnable pedestal
Mounting version turnable, fastening at front:
A
Angle of turn for turnable mounting version
The first stop plate is premounted for a max. angle of turn of 350°.
With the second enclosed stop plate you can define an individual angle.
The angle of turn can be devided with 6 screws in 60° steps.
Note!
Use suitable cable
If the VisuNet EX2 GMP should be turnable during operation, you must use suitable cable and
cable glands according to EN 60079-19.
Figure 2.6
1. Locking screw
2. premounted stop plate
1
Turnable mounting version
2
37