Pepperl+Fuchs VisuNet EX2 GMP RM/PC 3700 Series Hardware Manual page 50

VisuNet EX2 GMP RM/PC 3700 Series
Installation and Commissioning
2. Remove the cable gland plate inside the EX2 wall bracket by unscrewing the 4 screws.
Running the keyboard cable through the pedestal
If you use a pedestal with keyboard pipe (PEDESTAL1-150-1P-KP-*), a wire pull is already
installed for running the keyboard cable through the pedestal. Run the keyboard cable first.
Run all other connection cables after that.
1. Tighten the keyboard cable (2) to the wire pull (1).
2. Carefully pull the keyboard cable up through the pedestal.
3. Remove the wire pull from the keyboard cable.
4. Attach the keyboard with 2 grub screws on the pedestal.
50