Pepperl+Fuchs VisuNet EX2 GMP RM/PC 3700 Series Hardware Manual page 49

VisuNet EX2 GMP RM/PC 3700 Series
Installation and Commissioning
1. To seal the pedestal against the floor, use the enclosed gasket.
2. Mount the pedestal by using the 4 screws (M8).
Figure 3.4 Pedestal from bottom (photo) and from side (drawing)
1. Pedestal
2. Gasket
3. Ground
Mounting and Connecting VisuNet EX2 GMP to Pedestal
1. Screw the VisuNet Ex2 GMP to the EX2 wall bracket with 4 screws (M5x20) and the Nord-
Lock® washers (A) (Torque 4 Nm). The Nord-Lock® wedge lock washers (A) positiveley se-
cure the fastener in a joint which is subjected to any kind of vibration or dynamic loads
1
2
3
A
49