Blades; General; Excel Series Blades; Transport And Storage - Husqvarna Soff-Cut 150 Operator's Manual

General

CAUTION! Inspect the blade for damage,
!
cracks, loss of segments, warping,
overheating, excessive wear or a damaged
tri-arbor hole. If the blade shows any of
these problems, discard the blade.
Make sure the blade is marked with a
maximum operating speed greater than 4450
rpm.
Use only Husqvarna Excel Series blades or blades marked
with a maximum operating speed greater than 4450 rpm.

Excel Series blades

CAUTION! Husqvarna Excel Series diamond
!
blades are designed to only cut green
concrete. Cutting any other material may
result in blade failure or a dangerous
condition.
The Excel Series are designed specifically for the Soff-Cut
Ultra Early Entry dry cutting system of green concrete.
These specialty blades are designed to increase speed and
life while cutting a wide range of aggregates.
Choose the correct blade for your application. If you are
uncertain of what blade to use contact your local service
dealer.
Excel 1000
XL6-1000
purple
Excel 2000
XL6-2000
green
Excel 3000 red XL6-3000
Excel 4000
XL6-4000
orange
Excel 5000
XL6-5000
yellow
Excel 6000
XL6-6000
black

Transport and storage

• Remove the blade before transportation or storage of the
machine.
• Store the blade in a dry place.
• Inspect new blades for transport or storage damage.
8 –
English

BLADES

Ultra hard aggregate and
non abrasive sand.
Hard to ultra hard aggregate
and non abrasive sand.
Hard aggregate, medium
abrasive sand.
Medium hard aggregate,
medium abrasive sand.
Medium hard to soft
aggregate, abrasive sand
Soft aggregate, highly
abrasive sand.