Errors
Error: No PSD on the SendPro C200, C300 and C400
Issue
The meter displays the message "No PSD" and will not function.
Cause
An internal component has malfunctioned.
Resolution
1. Turn off the network connection:
For wired networks, unplug the network cable.
l
For WiFi networks:
l
a. Tap Settings (gear icon).
b. Tap Wi-Fi.
c. Tap the slider so that it moves to the off position.
2. Reboot the meter:
a. Unplug the power cable.
b. Wait for the display to turn off.
c. Wait one minute.
d. Plug the power cable back in, ensuring that it is plugged directly into a wall outlet.
3. Reconnect the network cable.
Pitney Bowes
Operator Guide
June 2018
173