Measuring point
Datum line — (10)
Datum line — (57)
Datum line — (74)
Datum line — (75)
Datum line — (79)
Datum line — (90)
Datum line — (91)
(10) — (75)
(57) — (90)
(74) — (75)
CAUTION:
For the reference point (10), refer to the figure "FRONT 2, DIMENSIONS, Body Reference Points" on
page 70.
For the reference point (57), refer to the figure "INSIDE 2, DIMENSIONS, Body Reference Points" on
page 74.
Except the reference points (10) and (57), refer to the figure "LOWER SURFACE, DIMENSIONS, Body
Reference Points" on page 65.
Measurement for Combined Parts
Datum dimension mm (in)
632 (24.88)
393 (15.47)
220 (8.66)
220 (8.66)
6 (0.24)
118 (4.65)
231 (9.09)
45 (1.77)
372 (14.65)
144 (5.67)
BS - 81
Measuring point
Datum dimension mm (in)
(75) — (79)
(75) — (90)
(90) — (91)
(10)R — (10)L
(57)R — (57)L
(74)R — (74)L
(75)R — (75)L
(79)R — (79)L
(90)R — (90)L
(91)R — (91)L
718 (28.27)
2,424 (95.43)
573 (22.56)
1,163 (45.79)
1,087 (42.80)
876 (34.49)
851 (33.50)
548 (21.57)
1,096 (43.15)
883 (34.76)