Number Of Panels To Be Drilled; Hole Drilling For Plug Welding - Subaru Forester 2019 Repair Manual

3. NUMBER OF PANELS TO BE DRILLED

Depending on the number of panels, drilling is done
through one panel or two panels, and this number
is listed together with the removal direction.
(1) Drilling through one plate
Inside
(A)
(Inside  1)
(A)
(Outside  1)
(B)
(2) Drilling through two plates
Inside
(C)
(Inside  2)
(C)
(Outside  2)
(D)
Foreword
Outside
(B)
BS-00651
Outside
(D)
BS-00652
BS - 5

4. HOLE DRILLING FOR PLUG WELDING

(1) Drilling of holes for plug welding in service parts
(1) Service part
(2) Drilling of holes for plug welding in service
parts, matching the holes on the vehicle side
(2)
(1) Vehicle side
(2) Service part
(Service part)
(1)
BS-00653
(Service part, matching)
(1)
BS-00654