Measurement For Combined Parts; Suspension Mount & Engine Mount - Subaru Forester 2019 Repair Manual

10.Measurement for Combined Parts

A: DIMENSIONS
1. SUSPENSION MOUNT (SUB FRAME  SUSPENSION MOUNT) &ENGINE MOUNT
• The front-back dimension is the projected dimension.
• The height dimension is the vertical distance from the virtual horizontal line based on the flange base of the
side sill (bend angle point) to the reference point.
(A) Standard line
(10) Front suspension mounting hole
(symmetrical), front
(57) Rear suspension mounting hole
(symmetrical) , front side
(74) Front cross member mounting
hole (symmetrical), front side
Measurement for Combined Parts
(10) (10) (10)
(74) (75) (74) (75) (75)
(74)
(79) (79) (79)
(10) (10) (10)
(74) (75) (74) (74) (75)
(75)
(79) (79) (79)
(79) (79) (79)
(74) (75) (74) (75) (75)
(74)
(10) (10) (10)
(B) Side sill outer panel
(75) Front cross member mounting
hole (symmetrical), rear side
(79) Cross member upper mounting
hole (symmetrical)
(90) Rear suspension cross member
mounting hole (symmetrical), front
side
(90) (90) (90)
(90) (90) (90)
(90) (90) (90)
BS - 80
(57) (57) (57)
(B)
(91) (91) (91)
(A)
(57) (57) (57)
(91) (91) (91)
(91) (91) (91)
(57) (57) (57)
(91) Rear suspension cross member
mounting hole (symmetrical), rear
side
BS-09922