Understanding The Home Screen - Altronic CPU-95 Operating Instructions Manual

4.0 UNDERSTANDING THE HOME SCREEN

4.1 A series of home screens are used to describe the current status of the ignition
system. The LCD display always reverts back to one of the home screens after
a keypad operation is completed or times out. The home screen is designed to
display the most critical operating parameters on one screen.
4.2 The READY message is displayed when the ignition is ready for the engine to
crank for starting.
4.3 Once the engine begins turning, the SYNCING message is displayed while the
ignition system verifies signals from the engine pickups.
4.4 The FIRING message is displayed when the ignition begins firing. Additional data
is provided on this screen to describe the selected mode of operation for the
ignition. The bit stream selection (E1,E2,E3) and the single-strike/multi-strike
type (SS or MS) are described in the middle of the upper line in small characters.
CPU-95EVS OI 7-13
All rights reserved © ALTRONIC, LLC 2013
4