10.4 When a fault or warning is present, the operator can display the actual cause of
the diagnostic as depicted below.
FROM THE
HOME
SCREEN
Then from the diagnostic description screens use the following keys.
PRESS TO
VIEW NEXT
ENTER
10.5 Diagnostic Fault screens, in order of display priority:
When zero gear-tooth pulses are
seen between two reset pulses.
When too many gear-tooth pulses
are seen without a reset pulse.
When there are no Hall-effect
pickup pulses or when the pick-
ups are not synchronized.
CPU-95EVS OI 7-13
All rights reserved © ALTRONIC, LLC 2013
OR PRESS
PRESS TO
TO VIEW
EXIT
NEXT
NEXT
PRESS
DIAG
ESC
27