Table of Contents
Advertisement
7.0 ADJUSTING INDIVIDUAL OFFSETS
7.1 The timing of individual cylinders can be offset by up to 3 degrees of advance
or retard from the global timing of the engine. Adjustments made as described
below should be considered temporary. The ignition will revert back to the values
saved in EEPROM memory on every reset, start or power-up. To save temporary
adjustments to EEPROM memory SEE SECTION 8.0.
7.2 Enter the individual timing adjustment menu as described below.
FROM
THEN AT
THEN At
7.3 The individual timing adjustment screen identifies the primary output to be
adjusted, and the degrees of offset in use for the output.
THEN AT
TO
TO
ADVANCE
RETARD
CPU-95EVS OI 7-13
All rights reserved © ALTRONIC, LLC 2013
PRESS
TIMING
PRESS
PRESS
NOTE: 2.5 degrees
advance for
output A.
TO
TO
ESC
NEXT
SELECT
EXIT
NEXT
CYL.
14
NOTE: In applications with narrow fir-
ing angles, the adjustment range may
be limited.
NOTE: The output identification
characters can be configured.
SEE SECTION 9.0
Hide quick links:
Advertisement
Table of Contents
