9.0 SETUP CONTROL OPTIONS
9.1 Additional control settings and display features can be accessed under the Setup
menu. Changes made under the Setup menu are stored in EEPROM and remain
fixed until changed again. The Setup menu can be entered as described below.
FROM
9.2 The first setup screen permits the operator to enable or disable the Multi-Strike
feature.
Note 1: A special feature can be selected during configuration to force Multi-
Strike to be active below 250 rpm, or when the Misc. Input is grounded.
This feature is not active in a standard configuration.
Note 2: The use of Multi-Strike firings may tend to accelerate spark plug elec-
trode erosion.
Note 3: The Multi-Strike feature is used to select spark profiles 4-6. See figure 2.
AT
TO
TO
TURN
TURN
ON
off
MULTI
MULTI
CPU-95EVS OI 7-13
All rights reserved © ALTRONIC, LLC 2013
PRESS
SETUP
FOR
TO
NEXT
ESC
NEXT
EXIT
option
17