Altronic CPU-95 Operating Instructions Manual page 19

9.5 The next setup screen is used to specify the exact position of the reset pin. Both
the reset position and the engine timing are displayed. Adjustments are made
here to make the displayed timing match the actual spark timing as verified with
a timing light. This adjustment effects the displayed timing but does NOT change
the actual timing of the firings.
AT
TO TO
INCREASE DECREASE
9.6 The next setup screen is used to enable or disable VALUE PROTECTION of
all user values in the EEPROM memory. When protection is on, none of the
EEPROM settings under the Setup or Timing menus can be changed. This feature
can be used to provide limited protection from random changes by inexperienced
operators.
AT
TO TURN TO TURN
ON PRO- OFF PRO-
TECTION TECTION
CPU-95EVS OI 7-13
All rights reserved © ALTRONIC, LLC 2013
FOR TO
ESC
NEXT
NEXT EXIT
OPTION
FOR TO
ESC
NEXT
NEXT EXIT
OPTION
19
NOTE: Adjustment of this parameter
should be done while individual cylinder
offsets are all at zero.
NOTE: To set up, or adjust the actual
reset position, and engine timing, see
form CPU-95EVS II, section 8.0.