3. Block/ Wiring Diagram
4. Default Settings
Default settings for the tM-P8 module are as follows:
。 Protocol: Modbus RTU
。 Module Address: 01
。 DIO Type: Type 40
。 Baud Rate: 9600 bps
tM-P8 8-channel Isolated Digital Input Module - QuickStart (Aug/2017)
ICP DAS USA, Inc. |
www.icpdas-usa.com
• Use 26-12 AWG wire for
• Strip the wire to a length of
• Use a crimp terminal for
• Avoid high-voltage cables
• For RS-485
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
signal connections.
7±0.5mm.
wiring.
and power equipment as
much as possible.
communication, use
insulated and twisted pair
24 AWG wire, e.g. Belden
9841.
2