Table of Contents
Advertisement
Quick Links
VW-1312P
12-Display / 9-Display 4K2K Video Wall
Processor
User Manual
The VW-1312P
conformance to safety regulations and requirements, and has been certified for international use.
However, like all electronic equipments, the VW-1312P should be used with care. Please read and
follow the safety instructions to protect yourself from possible injury and to minimize the risk of
damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
INTRODUCTION................................................................................................................. 1
FEATURES ......................................................................................................................... 1
PACKAGE CONTENTS ...................................................................................................... 1
SPECIFICATIONS .............................................................................................................. 2
HARDWARE INSTALLATION ............................................................................................. 3
CONNECTION DIAGRAM .................................................................................................. 4
PANEL DESCRIPTIONS ..................................................................................................... 5
OPERATION APPROACH .................................................................................................. 7
EDID LEARNING .............................................................................................................. 17
WARRANTY ..................................................................................................................... 18
rev: 150409
Made in Taiwan
Safety and Notice
12-Display / 9-Display 4K2K Video Wall Processor
has been tested for
Advertisement
Table of Contents
Related Manuals for GoMax Electronics VW-1312P
Summary of Contents for GoMax Electronics VW-1312P
-
Page 1: Table Of Contents
However, like all electronic equipments, the VW-1312P should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of 12-Display / 9-Display 4K2K Video Wall damage to the unit. -
Page 2: Introduction
1x Rack-mounting ear set 1x AC power cord 1x USB to RS-232 cable There are two kinds of the unit (9 outputs and 12 outputs), if you buy VW-1312P-9X, the output card module cage #4 (output 10~12) is optionally available. -
Page 3: Hardware Installation
HARDWARE INSTALLATION CONNECTION DIAGRAM VW-1312P as master 1. Connect all sources to DVI/HDMI, VGA or Component Inputs on the VW-1312P. 2. Connect all displays to DVI/HDMI Outputs on the VW-1312P. 3. Connect the AC Power cord (100-240V) to the VW-1312P. -
Page 4: Panel Descriptions
PANEL DESCRIPTIONS SUPPORTED RESOLUTION Input resolution supported VW-1312P Front Panel HDMI 1 HDMI 2 Component (YPbPr) 640x480 640x480 800x600 @60Hz EIA 720x480p @59.95(60)Hz 720x480 720x480 1024x768 @60Hz EIA 720x576p @50Hz 720x576 720x576 1280x720 @60Hz EIA 1280x720p @59.94 (60)Hz 800x600 800x600 1280x768 @60Hz EIA 1920x1080i @59.94(60)Hz... -
Page 5: Operation Approach
Software Operation System Requirements and Precautions 1. Whenever power off VW-1312P, please stay unpowered at least 5 to 10 seconds to allow power capacitors to discharge. 2. The VW-1312P provides software control program which runs under Microsoft Windows 98, 2000, XP, 7, 8 through the interface of RS-232 serial control. - Page 6 When setting the different resolution, the coordinate of output will also be changed. * If you buy VW-1312P-9X, the display output port will only show output 1~9. In the right part of control interface, users can customize the display mode thru controls.
- Page 7 (2) Display setting (3) Contrast/Brightness There are two modes. In here, user can adjust the brightness and contrast of output. Custom In Custom define mode, user can slide the white circle to adjust the size of the output screen or enter the number to adjust the coordinate. In addition, if user wants to understand or estimate which part you may select, it also can select the button 4.
- Page 8 (2) Learn EDID (5) Output Card firmware update* Select Default EDID (1-4 default EDID). * If you buy VW-1312P-9X, the output card will only show output 1~9. (The default EDID of 4K2K only suit for HDMI 2) Select Input.
- Page 9 (6) Factory Reset 6. Info Read the software and firmware version. Click button to do factory default reset. This default reset process will take about 10 seconds. After pop-up a dialog indicates “Finished”, please restart this machine. 7.
-
Page 10: Edid Learning
SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the VW-1312P features and specifications is subject to change without further notice.
Need help?
Do you have a question about the VW-1312P and is the answer not in the manual?
Questions and answers