Cisco PIX Series User And Installation Manual page 110

Installing a DC Power Supply
Figure 6-20 Inserting the Power Supply in the Chassis
Connect the six-pin connector to the motherboard.
Step 3
Step 4 Route the fan cables on top of fans exactly as shown in
connected to the two installed fans on the right. The connectors to these two fans will fit into the space
between the second and third fans.
Step 5 Reconnect the power connector.
Cisco PIX Security Appliance Hardware Installation Guide
6-20
Power
Chassis hook
supply
Power
supply
slot
Chassis bottom
Figure 6-21. Note that the two longest cables are
Chapter 6 PIX 525
78-15170-03